Product Ranges
TEAAC IC611 Squirrel Cage Low & Middle High Voltage Motor
TEAAC (YKK) squirrel cage rotor three-phase asynchronous motor, the protection level of this series of motors is IP44 or IP54, the cooling method is IC611, the insulation level is F, and the rated voltage is 11KV.
This series of motors are suitable for driving various machines without special requirements, such as machine tools, compressors, water pumps, ventilators, conveyor belts, crushers, etc., and can be used as prime movers in the machinery industry, petroleum industry, power generation industry and various industrial and mining enterprises.
Frame Size
H315-1000
Output
160 -10000 KW
Frequency
50 OR 60 Hz
Voltage
11000 V
Pole
2/4/6/8/10/12
Enclosure
IP44 IP54 OR IP54
Cooling
IC611 OR CACA
Mounting
foot-IMB3/IM1001;vertical-IMV1
- Low noise and vibration
- Strong moisture resistance
- The motor is welded with all steel plates, with reasonable structure
- The energy loss is reduced by 20% based on the IEC34-1 standard
- Low loss silicon steel sheet
- Vacuum Pressure Impregnation (VPI) Class F Solvent-free Paint Treatment
- The top comes with an air-to-air cooler with good heat dissipation performance
- The motor's enclosure protection grade standard is IP23, and can be made into IP44 (duct ventilation) or IPW24 (weather protection type) according to user requirements. If the user has any other configuration requirements, they can also be met as much as possible.
This product is available in several variations. Contact us to discuss your exact requirements.
Customize Your Motors
We can customize the motor for you according to your working conditions.
- Corona protection at altitudes of 1000 meters and above
- IP55 Protection
- Double shaft
- SKF bearings
- W outdoor, F indoor anti-corrosion, WF outdoor anti-corrosion
- YTM
- Frame size is above H630
- Frame Size: H500 with thrust sliding bearing
- The motor with electric heater
- The motor with Current Transformer
Notice for Ordering
Basic conditions for normal operation of large horizontal TEAAC IC611 Squirrel Cage Low & Middle High Voltage AC Motor:
- Altitude not exceeding 1000m
- The maximum ambient air temperature shall not exceed 40°C; the minimum ambient air temperature shall be -15°C for motors with rolling bearings and 5°C for motors with sliding bearings;
- The power frequency is 50Hz±l%
- The operating voltage variation range is not greater than the rated voltage ±5%
- The motor is rated for continuous duty S1
Applications
The Industrial Fan
A industrial fan is a machine that relies on input mechanical energy to increase gas pressure and discharge gas. It is a driven fluid machine.
The Water Pumps
A water pump is a machine that transports liquids or pressurizes liquids. It is mainly used to transport liquids including water, oil, acid and alkali liquids, emulsions, suspensions and liquid metals.
The Mining Machines
Mining machinery is the machinery directly used for mineral mining and mineral separation, including mining machinery and mineral separation machinery.
The Paper making Machinery
Paper making machinery refers to machinery that includes raw material preparation, pulping, paper making, and making finished rolls or flat sheets, as well as processing paper and paperboard.
The Chemical Machinery
Chemical machinery can be roughly divided into: grinding series (sand mill, colloid mill, ball mill, three-roller grinder, etc.); complete sets of coating equipment; kneading series; stirring and dispersing series; reaction series; emulsifying series; mixing series; dry powder mortar equipment; filtration series, etc.
Advantages
High Power Efficiency
Fast Delivery
Wide range of applications
Complete range of motors
Key Points You Need To Know About the High Voltage AC Induction Motor
Table of Content
CHAPTER ONE
Main technical indicators of the high voltage asynchronous motor
a) Efficiency η: The ratio of the motor’s output mechanical power to its input electrical power, usually expressed as a percentage.
b) Power factor COSφ: The ratio of the motor’s input effective power to its apparent power.
c) Locked-rotor current IA: The effective value of the steady-state current input from the power supply circuit when the motor is at rated voltage, rated frequency and the rotor is blocked.
d) Locked-rotor torque TK: The minimum measured value of the torque generated by the motor at rated voltage, rated frequency and when the rotor is blocked.
e) Maximum torque TMAX: The maximum torque generated by the motor when the speed does not drop suddenly at rated voltage, rated frequency and operating temperature.
f) Noise: The maximum value of the A-weighted sound power level dB (A) when the motor is running at no-load steady state.
g) Vibration: The effective value of the vibration velocity of the motor when it is running at no-load steady state (mm/s).
CHAPTER TWO
Key points for high voltage motor selection
a) Load type
b) Mechanical torque – torque characteristics
c) Mechanical working type
d) Mechanical starting frequency
e) Load torque inertia: The motor torque inertia is 15% larger than the main machine torque inertia for the most economical operation.
f) Whether speed regulation is required
g) Mechanical starting and braking methods
h) Whether the machine needs to be reversed
i) Where the motor is used
CHAPTER THREE
Advantages and characteristics of high-efficiency and high-voltage three-phase asynchronous motor
1. Optimized electromagnetic design
This series of motors uses the finite element method to analyze electromagnetic performance, heat generation, mechanical stress and deformation, and performs electromagnetic optimization design. The size, air gap, slot fit and slot shape are fully optimized, so that the size of the motor is reasonably matched and the performance of the motor is optimal.
2. Low harmonic winding
This series of motors uses low harmonic windings to reduce the stator copper loss and stray loss of the motor and improve the operating efficiency of the motor.
3. High-strength magnetic slot wedge
After long-term research, our company uses high-strength magnetic slot wedges, stable slot wedge fastening processes and materials, successfully solves the problem of magnetic slot wedge shedding, and improves the electrical performance of the motor.
4. Optimized ventilation and cooling system
Use backward centrifugal fans, axial flow fans, etc. to optimize the internal and external ventilation systems of the motor, improve the cooling effect, reduce the ventilation loss of the motor, especially the high-speed motor), reduce ventilation noise, and improve the efficiency of the motor.
5. Green insulation system
This series adopts an insulation system with comprehensive performance improvement. The voltage characteristics, temperature characteristics, bending strength, breakdown voltage test, thermal aging and electrical aging test all show that the insulation system of this series has reached the first-class level. This series uses high-quality mica tape, environmentally friendly impregnated tree brain wells to complete each process of coil production on CNC winding machines, expansion machines and taping machines, and then undergoes vP treatment. Therefore, the insulation performance is reliable, the mechanical strength is good, and the moisture resistance is strong.
6. High efficiency
The efficiency of this series of motors reduces the loss by 20% based on the efficiency of B/T10446 and GB/T13957. The efficiency is set to the level 2 energy efficiency requirements of GB30254-2013. It is a truly high-efficiency motor, which can greatly improve the operating efficiency of customers. It saves more than 20% of electricity for users compared to level 3 energy efficiency products. It is a national energy-saving and people-benefiting project product.
Scope of use:
This series of motors can be used to drive various general machinery such as compressors, ventilators and water pumps, cutting machine tools, transportation machinery and other mechanical equipment, and can be used as prime movers in various industrial and mining enterprises such as mines, machinery industry, petrochemical industry, power plants, etc. For motors used to drive blowers, coal mills, rolling mills, hoists, crushers, belt conveyors and other machinery with large rotational inertia, relevant technical information should be provided when ordering, and a technical agreement should be signed as the basis for special motor design, and a special motor of the derived series should be selected to ensure reliable operation of the motor.
Learn More From FAQs
You’ll find yourself working in a true partnership, resulting in an incredible experience and a competitive end products.
We are a professional manufacturer that produces and sells a variety of motors.
No. We can accept an order just for 1 motor.
For all our customers, they may have different technical requirements, such as power, voltage, type, etc. The price also varies according to different order quantities. Therefore, it is really difficult for us to provide a price list. If you can share your detailed specifications and order quantity, we will provide the price to you.
We can provide both FOB and CIF prices.
Contact Us
Consult your motor expert
LUPMOTORS is your best choice!
